On the Sequential Pro-One itself you need to set the centre switch in the MODE section of the Pro-One to the Repeat/Ext position to allow the gate to work with an external MIDI to CV converter. The Pro Solo Mk3 will also allow you to use its own ADSR Envelope Generator to modify the filter cutoff. MIDI to CV Converter Settings for the Sequential Pro-Oneġ. Use the following settings on the converter for the Pro-One: Output Connect them to your MIDI to CV converter as follows: MIDI to CV ConverterĬonnecting the MIDI to CV converter to the Sequential Pro-One The Pro-One has CV/Gate/Filter 1/4″ mono jack sockets. You will also need 3 x 3.5mm to 1/4″ mono jack leads. Any of our current MIDI to CV converters will be suitable for the Pro-One: Our MIDI to CV converters have CV and GATE outputs, and a number of AUX outputs that can be configured for your specific requirements. Which MIDI to CV converter should I use for the Pro-One? You can control the Pro-One using MIDI with a MIDI to CV converter. The Pro-One is already fitted with 1/4″ CV, Gate and Filter sockets. Using the Pro-One’s Sockets with a MIDI to CV converter With the retrofit, the MIDI mod wheel controls the LFO of the Pro-One (as its own Mod Wheel does).Ĭlick here for the Kenton MIDI Retrofit Kit for the Sequential Pro-OneĢ. Note that the retrofit is MIDI IN and THRU only, there is no MIDI Out. With the retrofit kit you’ll have MIDI control of Notes, Pitchbend, Modulation, Filter cutoff, Portamento / Glide, Sustain. Fitted inside your Pro-One, our MIDI Retrofit Kit adds MIDI IN and THRU sockets. You can fit a MIDI retrofit kit which will allow you to control the Pro-One directly using MIDI from your DAW, MIDI Sequencer or other MIDI controller. Fit a MIDI Retrofit Kit to the Sequential Pro-One
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |